Ultra Sonic Double End Inserts
$0.00
Description
*Plus .003 minus .000
**Minimum Hole Depth, insert length plus .020
Thread Spec. Per MIL-S-7742
Brass Per ASTM-B-16/16M-19
When installing insert into a boss, the minimum diameter of the boss should be at least 2 times the diameter of the insert
Class 3A/4H screw must pass with finger torque, but basic go gage may stop at last thread
| Part Number | Thread Size | A ±.005 |
B ±.004 |
C ±.004 |
Recommendations | |
|---|---|---|---|---|---|---|
| Hole Size ±.003 -.000 |
Hole Depth Min. |
|||||
| SWDE 440 | 4-40 | .184 | .226 | .154 | .156 | .250 |
| SWDE M3 | M-3 | .184 | .226 | .154 | .156 | .250 |
| SWDE 6M3 | 6M-3 | .217 | .281 | .184 | .188 | .312 |
| SWDE 632 | 6-32 | .217 | .281 | .184 | .188 | .312 |
| SWDE M3.5 | M-3.5 | .217 | .281 | .184 | .188 | .312 |
| SWDE 832 | 8-32 | .249 | .321 | .217 | .221 | .360 |
| SWDE M4 | M-4 | .249 | .321 | .217 | .221 | .360 |
| SWDE 1032 | 1032 | .279 | .375 | .249 | .252 | .406 |
| SWDE 1024 | 1024 | .279 | .375 | .249 | .252 | .406 |
| SWDE M5 | M-5 | .279 | .375 | .249 | .252 | .406 |
| SWDE 25028 | 1/4-28 | .343 | .500 | .312 | .315 | .531 |
| SWDE 25020 | 1/4-20 | .343 | .500 | .312 | .315 | .531 |
| SWDE M6 | M-6 | .343 | .500 | .312 | .315 | .531 |
| SWDE 31224 | 5/16-24 | .403 | .500 | .375 | .378 | .531 |
| SWDE 31218 | 5/16-18 | .403 | .500 | .375 | .378 | .531 |
| SWDE M8 | M-8 | .403 | .500 | .375 | .378 | .531 |
| SWDE 37524 | 3/8-24 | .495 | .500 | .465 | .468 | .531 |
| SWDE 37516 | 3/8-16 | .495 | .500 | .465 | .468 | .531 |
| SWDE M10 | M-10 | .495 | .500 | .465 | .468 | .531 |
| *Plus .003 minus .000 **Minimum Hole Depth, insert length plus .020 |
||||||
Additional information
| Units | American, Metric |
|---|---|
| Thread Size | 4-40, 6-32, 8-32, 10-24, 10-32, 1/4''20, 1/4''28, 5/16''18, 5/16''24, 3/8''16, 3/8''24, M3x0.5, M3.5×0.6, M4x0.7, M5x0.8, M6x1.0, M8x1.25, M10x1.5 |
| Material | Brass |
